Robert Burnaby DGC

Posted by .

Note: There have been additional subsequent improvements to the course, so the information below should only be used as a guide at this time (10 May 2012).

Robert Burnaby Disc Golf Course was installed in Robert Burnaby Park in June of 1999 on a trial basis. It was approved as a permanent facility on June 19th, 2000 by the Parks Commission.

The course when installed consisted of 9 Innova Discatcher baskets and 9 pads. At present the course consists of 10 Innova Discatcher baskets, with 3 of the 10 holes having both a recreational and advanced tee pad.

The current course length is as follows, all holes are par 3:

Hole Length Comment
1 190’8″ / 58.1m Moved to the left of it’s original location due to fence, resulting in a straighter shot.
2 232’8″ / 70.9m Original hole
3P 175’9″ / 53.6m New tee pad in 2011
3A 144’6″ / 44.0m Original tee pad
4P 200’6″ / 61.1m New tee pad in 2011
4A 145’9″ / 44.4m New tee pad from probably 2000
5 ~150′ New hole added in 2011, basket moved end of Sep
6 341’6″ / 104.1m Original hole #5, renumbered
6W 381’0″ / 116.1m Alternate basket location for the original pad
7 251’4″ / 76.6m Original hole #6, renumbered
8 319’1″ / 97.3m Original hole #7, renumbered
9P 253’2″ / 77.2m New tee pad added in 2011 for original basket #8 (renumbered)
9A 187’0″ / 57.0m Original hole #8, renumbered
10 283’4″ / 86.4m Original hole #9, renumbered

Basket moved due to erosion concerns raised by the City of Burnaby.

5P 260’7″ / 79.4m New hole added in 2011
5A 164’7″ / 50.2m New hole added in 2011

Course last measured on 09 Sep 2011.

Leave a Reply